Add water movement or power your filter with the Dymax PH1200 Powerhead. This submerged motor-driven pump has a maximum flow of 1,200 L/h, uses 25 W, and suits aquariums from 100 L to 250 L.

It’s a basic component of Dymax filter systems, and can also be used as a circulation pump. It comes with a universal holder and a flow rate control valve.

Key Features

• 1,200 L/h flow: Maximum flow rate of 1,200 L/h.
• Adjustable flow: Flow rate control valve included.
• Universal holder: Helps you position the pump in your setup.
• Two uses: Works in Dymax filter systems or as a circulation pump.
• Submersible: Submerged motor-driven design.

How to Use

1. Check that your aquarium is between 100 L and 250 L.
2. Attach the universal holder, and position the pump fully under water.
3. Connect any tubing or filter parts, following the included instructions.
4. Plug it in, then adjust the flow with the control valve.

Please note: Never run the pump dry. Unplug it before handling or cleaning, and use a drip loop on the power cord.

Suitable For: Aquariums from 100 L to 250 L, for filtration or circulation.